Ask Experts Questions for FREE Help !
Ask
    chaolintsui's Avatar
    chaolintsui Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2009, 07:00 PM
    Concord gas furnace
    Hello, my Concord 80 turn the sparker on, then the burners turns on like supossed to, the problem begins when the sparker shuts off, aparently the burners shuts off at the same time the sparker does. As a result the blower never turns on.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Dec 29, 2009, 07:02 PM

    Clean the flame senser
    chaolintsui's Avatar
    chaolintsui Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 30, 2009, 06:40 PM

    Thanks very much, I cleaned it and now is working like new.

    Thanks again you saved me.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Dec 31, 2009, 03:34 PM

    Glad it worked out. Take care, Happy new years
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concord Gas Furnace [ 2 Answers ]

I have a Concord Gas Furnace Model CG90UB... it currently is wired to run the fan on low speed which I find is not adequate to move the air around the house... I would like to know how to change the fan speed to run on medium... the manual states there are four speeds... Low, Low Medium, Medium and...

Concord 80 plus gas furnace [ 2 Answers ]

My concord 80 plus gas furnace does not stay running even though the thermostat is calling for heat. The smart valve does 6 pulses when it goes into this mode. Could this be a thermocouple problem or should I look elsewhere? Thanks

Concord gas furnace [ 1 Answers ]

Hello Been looking at various problems with the concord. Most seem to be limit switches. Problem with mine is the small side hose from exhaust blower To switch is accumulating about inch of water in it And is shutting furnace down. Once tube is drained she fires up and Runs for 2 days then...

Concord 90+ gas furnace [ 1 Answers ]

Pressure switch open with inducer on ? What's the fix?

Concord 80 plus gas, furnace [ 5 Answers ]

Hi, glad to find some help, I found your site by accident,or my good fortune! I have a concord 80 , the thermostat clicks and the blower comes on but the furnace does not light,all help appreciated

View more questions Search