Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3 wires + 2 wires POOL MOTOR
[ 2 Answers ]
I need help connecting a motor for my pool. The motor has 3 wires coming out of it. 1 white, 1 black, 1 black with a white stripe. A continuity test on the 2 blacks says they are wired together somewhere. I have a power cable coming out of the ground. 1 white + 1 black cables inside. ...
Compressor Map
[ 2 Answers ]
I am working with refrigeration systems for some research. I am looking at the compressor map and have been told that a correction factor of .75 is fair to assume for conditions outside of the map's designated superheat and intake temp. Does anyone know where I can obtain any articles to support...
Air Compressor
[ 3 Answers ]
I have a new air compressor for my hot rod fabrication. The specifications are as follows, 5.5hp 80gal 24amp 240v. My question is, it calls for a 30 amp breaker and time delay fuse, Type "T". I am running 6/2 wire to supply the unit, it is about 90 ft from the main panel so we ran 6/2 for minimal...
Hampton Bay remote wires do not match fan wires
[ 1 Answers ]
Yesterday I installed a new Hunter ceiling fan. I also purchased a Hampton Bay wireless wall switch. Everything went well until I wired up the remote receiver. The receiver has a blue wire for the light that is supposed to connect to the blue wire (light) from the fan. The Hunter fan does not have... View more questions Search
|