My question concerns sealing a box cover to the junction box. I saw reference to this on a home improvement show. Also, some junction boxes are visible on the lower level near the parking garage of the building where I work, and I can see some type of sealer that oozed out between the box and...

I recently bought some 4” square junction box cover plates, made by Raco. As I was installing them I noticed one side was stamped (into the metal) “underside”. Never seen this before. Is this something new? Am I missing something here, or is this just possibly part of the manufacturing process? ...

HI there, I have a 1997 Kia Sportage and the fuse box is missing the cover that specifies what goes where. Does anyone know where I can find an image or reference of one?

My currior furnace has a colector box it has 3 plug in wires atached and two hose,s as in my first post the furnace runs well until it shuts off then I have to tap the colector box to get it to ignite and run until the next time it shuts off. What does this colector box have to do with lighting...

I have a junction box currently that I need to add wiring to. It has the opening and internal clamps to add two more wires but this would put the box over its legal limit of wires in the box. The box is in a location that can be gotten at without removing any part of the building. The box is...