Ask Experts Questions for FREE Help !
Ask
    reynoll's Avatar
    reynoll Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 1, 2008, 10:16 AM
    Coleman Furnace 25 YO
    I rent a double wide trailer and the furnace is the original furnace over 25 years old. At times the furnace will cycle 30+ times prior to actually kicking on to run. There is no consistency to when this happens so I can't track why. I usually keep my heat between 62-68 degrees throughout the day.
    Does this use up extra gas/electricity while this is happening?
    Does something need to be fixed/replaced?
    Am I looking at the furnace not working in the near future?

    Thank you!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Mar 1, 2008, 11:24 AM
    Yes there is a problem with your unit acting that way. Here is a trailer site that takes care of HVAC. Just list your problems in detail with your model number and post under Coleman.

    mobilehomerepair.com :: Index
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #3

    Mar 1, 2008, 08:15 PM
    You have a weak high limit switch or a bad fan limit control. The high limit switch will lock out the hole system in heat if it trips, when it cools down the cycle will restart. The blower only kicks on when the heat chamber reaches a set temp around 130 degrees. Its hard to say wich one is bad with out testing.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman Furnace [ 8 Answers ]

I Have a problem on a Coleman furnace, model # DGAA070BDTA. The problem is when the furnace kicks on, it lights the hot surface ignitor and lights the burner, but as soon as the fan comes on the burner shuts down and cycles about 5 times then shuts down. I have changed the board 2 times, replaced...

Coleman furnace [ 1 Answers ]

Does the upper limit switch act as a breaker? Will the red button pop up only when it needs to be reset? In other words, if the red button is not popped up does that mean it is working correctly?

Coleman Furnace [ 1 Answers ]

I have a Coleman Furnace in my mobil home and it keeps shutting off and won't hold a temperature. I have had a furnace company out and they replaced a gas valve but it did not help. To get the furnace to start back up I have to turn the thermostat off and then back on. It will run for a while the I...

Coleman Furnace [ 2 Answers ]

Our furnace is kicking on and off. Then it'll kick, but not go further to turn on the blower and heat? Do you think control issue or booster assembly>

Coleman Furnace [ 1 Answers ]

Burner will not stay light. Fan comes on, ign. Box activates, ign. Comes on, gas sol. Opens, Flame for 2-3 sec. ign. Box de-activates and drops gas sol. Ignitor after hot reads 40 ohms, cooling off as high as 170 ohm. Replaced: Ignitor box Gas sol. Blower PC Furnace was flooded with...


View more questions Search