Ask Experts Questions for FREE Help !
Ask
    mrjasger's Avatar
    mrjasger Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2009, 11:08 AM
    Coleman evcon
    I installed a Honeywell digital thermostat for my parents, which I have done myseld with no problems before. Foolishly, I didn't notice that the coleman evcon system has a couple more wires that the honeywell didn't have a place for, so I undid the wiring, and hooked the old therm back up. Note: I didn't cut the power, and I know a couple of the wires touch for a moment or so, not long at all. Anyway... the system won't come back on now. My multimeter is not reading any power at the thermostat. Any ideas on what may of happened and any suggestions?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 26, 2009, 11:14 AM
    Check the fuse that could be on the circuit board if so equipped. Also check the 24 volt transformer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman Evcon [ 2 Answers ]

My mother has a Coleman Evcon dgat090800 the problem is that the burner will light up on it and burn until the blower kicks on then the burner will quit I can test parts on it but am not positive what the readings should be can someone help.

Coleman Evcon Heater [ 4 Answers ]

I have a Coleman Evcon heater/ model DGU08012UB. The flame comes on for a few seconds and then it turns off. Then cool air blows out. This process continues. Can anyone help me with fixing this issue. Is it a common issue? Thanks for your help.

Coleman evcon [ 1 Answers ]

Furnace won't ignite the starter blower runs but nothing else happens

Coleman evcon burner on and off [ 1 Answers ]

I have a 1993 coleman evcon furnace model BGD07512AX. When I get a call for heat my blower comes on right away. Then my hot surface ignitor gets red hot. Then my blower comes on for 3-5 seconds and shuts off. This happens 3 times then furnace locks out with a retry alarm. Can anyone help me? ...

Coleman evcon [ 2 Answers ]

Fan won't come on in heat position

View more questions Search