Ask Experts Questions for FREE Help !
Ask
    typhooh's Avatar
    typhooh Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 21, 2013, 09:20 AM
    Code light flashes
    I have a Red T furnace I'm not sure the model, but the code light flashes four times. A sticker on it tells me that a regulator switch is the problem. I located the switches with the help of the wiring diagram. My question is, can I replace these switches myself and where can I get them if so?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Mar 21, 2013, 04:57 PM
    Natural gas, propane, electric, or oil burner? I only work on natural gas and propane Coleman/Red T units, and have never heard of a regulator switch, so Im assuming this may be an oil fired unit? If it is indeed gas or propane, let me know and we will get together on terms.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have goodman furnace, the DS1 Light Flashes 6 times pause and flashes 6 times again [ 0 Answers ]

I have a Goodman Furnace. The DS1 Light Flashes 6 times and according to the light it means. 6 Flashes = Open Rollout. What does that mean

Propane Furnace won't start no pilot light red light flashes 3 times [ 6 Answers ]

My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart

Furnace not running,code flashes 3short flashes by 1 long flash on a bryant 90 t [ 2 Answers ]

Code flahes 3 short flashes by 1 long flash

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?


View more questions Search