 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Circulation Fan / Furnace ??
Yes were a good couple months away from having to use the Furnace.. The issue is One Bedroom in the Basement and it's the Coldest Room in the House come Winter.. Question, If we put the Fan on Circulation ?? Would that draw the Cold Air out of the Basement and Mix it with the Main Floor Heated Air bring it back down to the Basement.. Unfortunately there is No Cold Air Return tied into the Duct Work in the Basement, and there is only 2 Heat Vents to the one Bedroom and there both in the Ceiling..
|
||||
Check out some similar questions!
I have a Nordyne Intertherm FEHB-015HA furnace. The circulation fan will not shut off. The thermostat works properly and kicks the elements off as it should, but the fan continues to run. There is a fan switch on this unit that can be set to auto or off, but it will not turn the fan off. The only...
I like to have thermostat set to "on" for constant air circulation and white noise. I just got a new furnace(Rheem RGPN-07eamer) and t-stat(hunter). Now, about 10 seconds before the heater kicks on, the blower goes off... Then comes back on with the heat. Do you know why the blower is would do...
This happens after we finished some basement remodling. Already tried to change air filters, checking return and blowing temperature(which are fine) and most recently changed a sensor and still the furnace shuts down episodically. What else could be happening?
My wife shuts off bedroom doors to keep the pets out. My question is will this keep heating and air from not circulating through out the house correctly? It seems our great room stays cold and the bedrooms are warm. Thanks.
My sister bought the house about year ago, last week she toll me The circulation blower does not turn off –always running (Trane XE90 gas furnace units in the house) Although the thermostat is set on 'Off' vs. 'Heat' or 'Cool' and fan ( I mean circulation blower) is on 'Auto', the fan runs...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
