Ask Experts Questions for FREE Help !
    Hectcita1018's Avatar
    Hectcita1018 Posts: 1, Reputation: 1
    New Member

    Oct 16, 2008, 08:10 AM
    Changing from non digital thermostat to digital
    I have an old non digital Honeywell T87F thermostat, gas burner with baseboard water heat. Can I change to a new digital Honewywell RTH230B and how? Thank you
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert

    Oct 16, 2008, 01:47 PM
    Easy follow the directions that come with the new thermostat.

    Read and follow exactly

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Changing analogue to digital -- Handycam videos [ 1 Answers ]

I have an older Sony Handycam Video Hi8 model CCD TRV228E PAL and would like to know the easiest way of converting my video to digital. I thought I should buy a digital handycam, put my tapes in and record onto my computer but don't really know if this is best or where to start. Basically I...

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Problems changing to digital thermostat (Hunter 33260) [ 1 Answers ]

I'm pretty good about reading other posts and I just couldn't find an answer for my situation... I bought my house last year in Arizona (very very hot now) and the thermostat looked like the same one from when the house was built 20-25 years ago. Deciding to do a cheap upgrade I purchased the...

Digital Thermostat Install [ 3 Answers ]

I'm installing a digital thermostat replacing and old non programmable one. I have 4 wires (red, yellow, green and white) that need to be attached to the new unit but I don't see where the common wire comes from per the new wiring instructions. What am I missing? Replacing Honeywell with Robert...

Changing Thermostat Analog to Digital have 110 volt wires [ 2 Answers ]

I have a baseboard hot water system with a gas boiler. Boiler is 6-7 years old. It has three zones with 3 separate pumps and thermostats. I checked the thermostat wires and they are 110 volts. Folks at the local hardware store I talked to were surprised with the 110 volts but suggested I could...

View more questions Search