Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changing from standard A/C units to inverters, is changing the copper lines mandatory
[ 0 Answers ]
I have wall embedded copper lines through several properties that want to switch to the new daikin inverters for a/c. Must I change all these copper lines?
Heat pump outdoor fan runs not compressor voltage at compressor good. New compressor
[ 1 Answers ]
Have a new compressor. Just replaced fan runs compressor does not, have voltage at the compressor plug? What could stop from coming on high side and low side equal at 100psig.
Amana air conditioning compressor fan runs but compressor does not
[ 9 Answers ]
I have an Amana Model RCE30A2B Compressor unit installed it is about 6 years old, the compressor will not cut in when demanded yet the cooling fan for the unit does
Air compressor changing motor
[ 35 Answers ]
I recently bought an air compressor with three phase power. I do not have three phase in this older property so I knew I would need to change the motor. I found a single phase 7.5 hp. Motor with the same shaft, etc. dimensions as the old three phase that I traded to a guy with the opposite problem....
Changing the outside unit vs. Changing the whole system
[ 7 Answers ]
My outside unit leaks Freon and needs to be replaced. The system is about 9-10 years old. Initially, the contractor gave me a $2500 estimate to change the outside unit to a new Trane XR14. When the written estimate came, it included changing the coil and fan package inside (it's a ceiling unit)... View more questions Search
|