Ask Experts Questions for FREE Help !
Ask
    elleanor's Avatar
    elleanor Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 26, 2009, 06:11 PM
    Central Heating blower not working
    My central heating blower is not working. Fan on outside unit works but inside fan does not. When I manually turn the fan on at the thermostat it still does not work. What do I need to check? Mine is electric furnace. The weather is getting cold lately but I could not turn my heater up... so sad... =(

    Thank you before..

Check out some similar questions!

Central Air blower not working [ 17 Answers ]

My central air conditioning blower is not working. Fan on outside unit works but inside fan does not. When I manually turn the fan on at the thermostat it still does not work. What do I need to check?

Central Air Blower not working. [ 7 Answers ]

The blower on my central air unit is not working. It starts to hum and if I spin the blades (which spin freely) manually it turns on for a few minutes but then shuts off. I turned the thermostat to ON and cool. Not sure the model number all I know is it says Sears All Conditioner on the side of...

Gas Central Heating Blower Speed [ 8 Answers ]

I have a gas central heating system. The heating guy adjusted the blower speed TO medium. It was set on low. I have 9 ft ceilings throughout the house. Will this adjustment help circulate the warm air better than the low speed? Will the higher blower speed push cool air through the system BEFORE...

Central AC with gas furnace blower not working [ 3 Answers ]

The house was getting hot so I checked the thermostat and discovered there was no air coming out of the vents. The outside unit comes on but no noise from up in the attic. I had no problems earlier in the day. The fan doesn't come on in the auto or on position.:confused:

Central indoor fan blower not working [ 11 Answers ]

Hi, My indoor blower quit working, first it made weird sounds during start few times and then quit. I have a Rheem Criterion furnace from 1992. The air handler and evaporator was replaced few years ago and other maintenance done. The run capacitor (Old one was a cylindrical 15MFD 370VAC...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.