Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier Circuit Board - Bad Resistor
[ 4 Answers ]
I have a Carrier Furnace which has a bad circuit board. I noticed that the resistors on the printed Circuit board look burned. The circuit board is a CES0110057-00 and the resistors reside on R57 and R58. I would like to replace the resistors but not sure how to identify the resistance level. ...
Carrier Air Handler Circuit board
[ 1 Answers ]
The compressor fan motor went bad as did the capacitor and contactor set. Replaced all and after that, the fan for the air handler would not shut off even with A/C and heat off. One morning smelled an electrical fire, checked in the attic, the air handler and it appeared the fan motor for the air...
Help Replacing Carrier Circuit Board HK42FZ004
[ 2 Answers ]
I have a Carrier gas furnace that is not getting gas; the rest of the cycle runs properly, including the HSI glowing, but there is no gas to light, so the system shuts down and I get a 21 error code (gas lockdown). I am showing no voltage to the gas valve at the point in the cycle when control...
Carrier Gas pack circuit board part #
[ 3 Answers ]
Can anyone suggest/cross-reference the part number for my circuit board? The model number for the unit is 48SS018-060. Thanks. View more questions Search
|