Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Janitrol furnace will not ignite from thermostat
[ 7 Answers ]
I have a Janitrol furnace, that I believe to about 50 yrs. Old, model # FEC 120-84, type D. When I turn the thermostat on, the pilot light will not ignite the burners. I then go to the furnace and trip a microswitch that appears to be wired to a thermocouple and activated by a rod that goes from...
Carrier furnace will not ignite
[ 2 Answers ]
Safety cutoff switch on air from small fan draft inducer fan I think high temp bimetal disk? Trips when its bypassed using aligator ciips furnace works. Is the switch just weak tripping when it shouldn't The furnace will work fine for a couple of weeks then not ignite because this switch is...
Carrier furnace won't ignite
[ 1 Answers ]
I own a carrier furnace Infinity installed in 1994 model p21559 B.V. the ignitor does not ignite and the blower does not blow. The thermostat reads hold -AC .This furnace has been a problem since it has been installed.
Gas furnace won't ignite sometimes
[ 5 Answers ]
Hi I have a 15 yr old carrier weathermaker gas forced air furnace model 58sxa080 the furnace works fine most of the time although every so often usually in the mourning and sometimes during the day ( after the thermostat sets itself back to 65 overnight) when the thermostat calls for the... View more questions Search
|