Ask Experts Questions for FREE Help !
Ask
    modelt's Avatar
    modelt Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2007, 08:45 PM
    Carrier furnace will not ignite
    Safety cutoff switch on air from small fan draft inducer fan I think high temp bimetal disk? Trips when its bypassed using aligator ciips furnace works. Is the switch just weak tripping when it shouldn't The furnace will work fine for a couple of weeks then not ignite because this switch is tripped. Is the furnace overheating because it needs cleaning or is the switch just needing to be replaced. There is a switch on the air from the two fans main fan and inducer fon . Also switches by the two burners. I thought of swapping the burner switch with the fan switch but mabe they are different set to trip; @ defferrent temps. If they were swapped and the one now on the air from the inducer now did not trip it would indicate a weak switch? Carrier 58DHC075 FURNACE. Thankl Terry
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 3, 2007, 11:44 PM
    Replace the thermal temp disk with the same part number. Do not substitute any other disk. I hope this disk is still available. Check with your local Carrier parts supplier.
    modelt's Avatar
    modelt Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 6, 2007, 08:57 PM
    Quote Originally Posted by hvac1000
    Replace the thermal temp disk with the exact same part number. Do not substitute any other disk. I hope this disk is still available. Check with your local Carrier parts supplier.
    hvac1000 Thanks for your response to my question on Carrier furnace got the part its in . Model t
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitrol furnace will not ignite from thermostat [ 7 Answers ]

I have a Janitrol furnace, that I believe to about 50 yrs. Old, model # FEC 120-84, type D. When I turn the thermostat on, the pilot light will not ignite the burners. I then go to the furnace and trip a microswitch that appears to be wired to a thermocouple and activated by a rod that goes from...

Gas furnace burner won't ignite [ 5 Answers ]

I have a 26 year old Friedrich gas furnace model GHA075NDC that the burner will not ignite. The pilot is lit and I can turn the fan on, but the burner will not ignite. Can anyone help me solve this problem?

Gas furnace burners won't ignite [ 4 Answers ]

17 year old gas furnace... burners won't ignite. What are the logical troubleshooting steps to solve this problem?

Carrier furnace won't ignite [ 1 Answers ]

I own a carrier furnace Infinity installed in 1994 model p21559 B.V. the ignitor does not ignite and the blower does not blow. The thermostat reads hold -AC .This furnace has been a problem since it has been installed.

View more questions Search