 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier Furnace Problem - Code 31
I have a Carrier furnace model 58MCA100-16. The past couple days we've been having issues with the furnace turning off rather quickly and not fully heating the house. The LED code on the furnace is 3-1. It blinks 3 times fast and then 1 long blink. After further inspection, there's a significant amount of water leaking from some of the drain tubes inside the unit. Once these are drained (manually by me into a bucket) the furnace operates fine for about 24 hours. Then I need to go back down to the basement and re-drain it manually. I've also noticed the white PVC piping coming from the furnace vent and going up and outside the side of the house has some dripping water on it (not a lot, just a few stagnant tear drops of water are seen on the outside of the pipe). I believe the problem is the 'condensate trap'. The water doesn't seem to be passing through that into the floor drain). I found a replacement 'condensate trap' online for about $15.00, but does anyone know if the issue is more than just that? Why would the PVC pipe going up to the basement ceiling have drops of water on it?
Thanks for your help! |
||||
Check out some similar questions!
I am getting a code 21 so I tried cutting power and when power is restored I activate the furnace. Right before the blower comes on I can hear a click. To me it appears the thermostat is answering the call but once the furnace comes on (blower starts blowing) it never fires up the gas.
Hi, I have a Carrier Furnace model #58SXB080G6 Which is flashing the error code #42. Can anyone tell me what that is and how to fix it?
I have a Carrier and the furnace and the heat will not come on. The fan does come on but the burners will not ignite. I get a red flash code of 2 short and one short. I have the same thermostat upstairs and I switched them and the same result. The upstairs works fine with both thermostats. I have a...
The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?
What does a code 34 mean on a carrier furnace?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
