 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier furnace fan not working in "on" position
My 10 year old Carrier furnace fan will only work when in heat or a/c mode, not when in "on" mode on the thermostat. Even when in "on" mode it acts as if it's in "auto" mode when heat/ac is on. It previously was running continuously in "on" mode, but stopped a few months ago. What could be the problem?
|
||||
Check out some similar questions!
Got home from the Brewer game this afternoon and noticed the house was warm(78). Outside was 91. I checked the T-stat and it was set correct. Noticed the air vents weren't blowing anything. Went outside and the condenser and fan was running fine. Then I went downstairs to the furnace unit to see...
I have an Intertherm Electric Furnace E2EB-015AH. I came home from work last night, turned the heat on and it didn't work as advertised. I could hear the relays clicking occasionally so I investigated a little and found the elements are heating up and cycling, the relay inside the thermostat cycles...
My thermostat only had two wires ran to it. I ran a separate wire to the "g" and back to the green wire on furnace but fan will not run. Am I missing something?
I have a Carrier Gas Furnace. I believe the model is 58CTA or 58CTX (not sure which one). The thermostat I have is "White-Rogers" Model 1F86-0471. We have NO A/C unit. The heating works fine (in the winter)... when it is cold - the furnace turns on, and flows nice warm heat around the house....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
