Ask Experts Questions for FREE Help !
    BeckyAB52's Avatar
    BeckyAB52 Posts: 1, Reputation: 1
    New Member

    Feb 12, 2006, 12:04 PM
    Carrier Furnace Evaporator Coils
    How often do these coils need to be cleaned?
    wheatnbarley24's Avatar
    wheatnbarley24 Posts: 63, Reputation: 3
    Junior Member

    Feb 12, 2006, 01:20 PM
    If you use a quality pleated type filter and change it reglarly you shouldn't have to clean you coils at all

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Carrier furnace blower motor won't turn off [ 5 Answers ]

I have a Carrier central air and furnace(furnace model 58GS050-3), it was built around November, 1985. It has carrier air conditioner indoor cooling coils box model 28AC030-911 laid on top of the furnace. Everything was working until one week ago. Now with the thermostat off and the fan set to...

Carrier Furnace - Burners turn on and off [ 2 Answers ]

On my Carrier furnace (model 58G5100-2) the igniter starts the pilot, and most times the pilot starts the burners after a minute or two and then the blower motor starts. Other times, pilot lights the burners which burn for a minute or two, stop and then start again... and after a few minutes...

Carrier furnace [ 2 Answers ]

Blower runs, furnace won't ignite. ( pilot light IS WORKING) 1. filter was cleaned 2. thermostat reprogrammed . Is there anything we can do beafore calling service?

Carrier heating/air furnace [ 1 Answers ]

We have a carrier gas furnace which is only about 5yrs old. The fan is not turning on the unit outside and it has begun making a loud noise but its working fine as far as heating the house. What could be the problem and would it cost a lot to fix. Thanks for any help.

Carrier Furnace [ 4 Answers ]

I am looking at furnace for a friend. The furnace will come on with that small fan and the pilot will light. However, the burner will not catch. This unit has a igniter I suspect that the igniter is bad. Is there any way to test it?

View more questions Search