 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier furnace 58sta/stx inducer motor doesn't shut down
The inducer motor on my furnace is always on. When the thermostat calls for heat nothing happens. However, if I remove the inducer motor hose for a minute then put it back on, it fires up as soon as the cover is replaced.
The heat and blower shut off once the required heat is reached but the inducer motor never shuts off. Therefore, the computer thinks it's stuck open so when the thermostat calls for heat again we get nothing unless we remove the hose again. |
||||
Check out some similar questions!
Hi All we just moved into our home Jan of this year. Our furnace/air conditioner is about10 years old and has been serviced for air condition this summer. well since its gotten colder we switched our 2nd level unit over to heat and waited for it to come on. it clicks but nothing happens. We took a...
Went to turn the a/c on last night and there was a code flashing on the thermostat. It is either L6 or upside down 97. Any idea what this code is for?
My carrier model 58STA/STX having problem when turn on heat. As soon as the thermal stat is trying to turn on heat, the display went off and then on again after few second then went off again. Nothing runs at all (no fan, blower... ). Any idea what went wrong? AC is still working.
Upstairs not cooling how to get it to turn
Hi all, I have this Carrier HVAC but its not blowing any heat at all. Cooling is fine. The burner and fan start as I can hear the fan and flame starts but it cuts off. I turned off the circuit breaker to reset it and try to re-start. It did re-start, blow air, starts the furnace but it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
