Ask Experts Questions for FREE Help !
Ask
    dcheng's Avatar
    dcheng Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 3, 2006, 07:35 AM
    Cannot not heat
    I have a noma programmable thermostat 52-2558-8. It works this morning, but now, it stops working. It cannot start up the heating. The temp I set is 19, now it is 18 and the heat is flash, but the it does not start up the heating system. Thanks
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Nov 3, 2006, 07:57 AM
    Go to the furnace or whatever, and check for 24 volts between the W terminal and common. If no voltage check the R and common. If still no voltage, you may have a blown fuse or bad control transformer. If you have power to the R, but not the W, the trouble is in the thermostat or wiring. If you have power to the W, the problem is with the furnace. Post back with more information.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #3

    Nov 3, 2006, 03:37 PM
    Try to turn of the power to the furnace and back on again. Tell me if the furnace tries to start. By the way, what kind of furnace? What's the age? What's the efficiency? Gas, LP or electric?
    METT's Avatar
    METT Posts: 14, Reputation: 1
    New Member
    		  
    #4

    Nov 3, 2006, 10:06 PM
    Quote Originally Posted by dcheng
    I have a noma programmable thermostat 52-2558-8. It works this morning, but now, it stops working. it cannot start up the heating. the temp I set is 19, now it is 18 and the heat is flash, but the it does not start up the heating system. Thanks
    You may also try to move the System slide switch from HEAT back to OFF and then HEAT again to see if it works. Open the unit and check if any wire (especially R and W) is loose.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whalen Heat Pump - no heat! [ 9 Answers ]

Hi, I live in a condo and have a Whalen Heat Pump. I changed the thermostat to a Noma digital programmable model (model # 52-255808) in the summer time. The A/C works well and the fan works well, but I did not test for heat as it was summer when I installed it. Well, now that the weather is...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Electric Heat-Pump-No heat [ 2 Answers ]

I had a wall-mounted unit installed in a room in may of this summer. In the middle of the night the heat shut off and has not come back on since. It is an Amana, electric heat with heat pump unit. The cooling works, the heating setting does not blow air at all. When I remove the cover it says...

Changing from gas heat to electric heat [ 3 Answers ]

How do you change from Apollo gas heating system to electric heating system?

No heat just a/c [ 1 Answers ]

A/c Broke Over The Summer, A Repairman Came In And Played With The Wiring. Now When I Turn My Thermostat To Heat, The A/c Goes On And Still Blows Cold Air. Pilot Is Lit, Just Can't Get Heat, Coupler Looks Good. I Think The Thermostat Wiring Is Wrong. What Can I Do To Fix?

View more questions Search