Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Coleman split unit outside unit- contacts will only engage manually
[ 0 Answers ]
2006 Coleman air handler with king heat pump. Would not come on and no power to thermostat (blank). Found 3 amp fuse blown and replaced. Fan worked, switched working thermostat to cool and fuse blew. Another fuse holding contractor in and all works. One dark spot on contractor coil, but does not...
My ac/heatpump unit blower is out of squence
[ 0 Answers ]
My blower on my heat pump unit is out of squence. The blower is coming on at the same time as the fan and heat pump there use to be a delay the blower came on then a few seconds later the fan came on and after fan out off the blower stayed on for a few seconds now everything comes on at the same...
Rheem heatpump outside unit cycling
[ 4 Answers ]
I have an all electric Rheem heatpump (don't know the model # but can fetch if necessary) that is not putting out any heat. The ouside unit will come on for about a minute and then will shut off. The inside air handler will continue to run though. I've set the temperature to 72 to test it (current...
Heatpump outside unit tryping braker
[ 1 Answers ]
Have checked with volt ohm meter for short. Tracked it to compressor. Is the compressor shoot?
New wiring of heatpump split system
[ 2 Answers ]
My house trailer has only electric heat. I have added the "A" coil and heatpump. I have replacaed the two wire thermostate cable with a five wire cable. One goes from the thermostate to the furnace the other goes from furnace to the outside unit. I'm using the two heaters as the aux heat. I have... View more questions Search
|