Ask Experts Questions for FREE Help !
Ask
    Bobo1953's Avatar
    Bobo1953 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2013, 06:32 PM
    A/C Unit doesn't work after changing filter
    The change filter indicator light came on and shut my unit down, I changed the filter and reset the thermostat but the unit will not come on. Compressor, fan, nothing powers up??
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Aug 14, 2013, 06:37 PM
    You probably don't have the door on the furnace or air handler installed properly.
    Bobo1953's Avatar
    Bobo1953 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 14, 2013, 07:19 PM
    Quote Originally Posted by Grady White View Post
    You probably don't have the door on the furnace or air handler installed properly.
    Thank you for your reply, I rechecked the door and it seems to snap in place only one way. I was wondering if the unit had a reset button because it did shut down and the change filter light came on. I had a maintenance agreement with the company that installed it but they have gone out of business.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #4

    Aug 15, 2013, 02:50 PM
    Is this an air handler or a furnace (either gas or oil fired)?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can not changing your filter make the fan motor stop on a central air unit [ 2 Answers ]

Our renters called and they said the unit is making a very loud noise and the chage filter light came on the thermostat could that mean the fan is not working

I replaced the filter in my Janitrol heater, now the unit doesn't lite or go on. [ 5 Answers ]

I changed the filter in our Janitrol heater, now it won't light.

AC outside unit doesn't work [ 3 Answers ]

Hello, I have a simple question. I had a guy replacing the board on our hvac a few motnhs back to fix the heat. Today I turned on the AC for a first time this year and the outside unit did not start at all ( the fan on the inside unit is blowing ). I opened the system and I saw two wires going...

Installed new thermostat unit doesn't work [ 4 Answers ]

Hi, Installed a digital thermostat, replacing a manual one. The fan worked for a short time, then switched to heat mode and it didn't work. Found I had it wired one wire wrong, Wired it right, then nothing, Could this cause damage to my unit? I put the old one back on it still doesn't work. I have...

Changing Air Filter on Carrier 58STA090 Unit [ 1 Answers ]

Where is the air filter on a Carrier 58STA090 Gas Furnace? How often should it be changed? Can I do this myself?

View more questions Search