 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
a/c keeps tripin the breaker when it tries to cycle
My a/c will run great but when it gets hot outside and the a/c goes to cycle it trips the breaker. When this happens I can turn the. Thermostat off and reset the breaker come int the thermostat back on and a/c will run great until it goes to cycle then trips the breaker again. Any other time it runs great but between 10am-7pm it trips the breaker and it just started about 2 days ago. I have replaced the breaker,also replaced the run capacitor and washed the coils out. Just trying to get some feed back. It's a 4ton train unit. Thanks
|
||||
Check out some similar questions!
Thermostat indicates that heater should be turning on. Circuit breaker has power, tested it. Cycling one of two circuit breakers starts Coleman Electric heater operation. Sometimes this will cause heater to work for days. Then out of the blue the house gets cold and the breaker has to be cycled...
Have a 30 year old Coleman Electric. Thermostat is flashing indicating relay (energy efficient) closed. Cycling one set of two 30 amp circuit breakers get the furnace running again. The dual breaker does not feel like it is tripped. But maybe one side could be tripped. Was thinking about changing...
We have had this problem with the circuit going out for a long time. The dishwasher is kitchenaid KUD1230B. The breaker is rated for 20 amp the unit says it draws max 12.5. When you get to the rinse and hold cycle it throws the breaker. Not sure if it is the unit or electric supply. And way to...
My Kenmore dishwasher will only start a cycle after I have reset the dishwater by flipping the breaker, what can I do to fix it?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
