Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace 1/4 hp condenser motor with multi hp AO Smith motor and Condenser
[ 1 Answers ]
I am replacing my Payne 1/4 hp condenser motor with an A.O. Smith multi HP motor. I'm also replacing the capacitor (a round three prong piece) with an oval (two prong piece). In looking at the wiring diagram I'm supposed to connect the wires as follows: the two brown wires to the capacitor,...
Trane condenser fan motor to A.O.Smith condenser fan motor
[ 2 Answers ]
The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...
A/C Condenser
[ 2 Answers ]
Why would the high side line coming from my condenser be as cold as the low side? Never seen that one before
A/c condenser
[ 4 Answers ]
My furnace gay said he can not install coolant into the new a/c condenser because the outside air temp had to be 75 degrees. Is that true?
Replacing A/C - condenser or heat pump/condenser
[ 1 Answers ]
I live in a condo. All of the units in the building need to new air conditioners because they are all old and will not survive a scheduled reroofing of the building. The association got a bid for a company that will put in a new condenser unit for anyone who wants one - it is about $1500 installed.... View more questions Search
|