Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3 Wire Thermostat Install?
[ 4 Answers ]
Hi All, I'm trying to replace my old mercury thermostat (from 1979 it seems) with a new 4+1+1 thermostat. I took off the old 'stat and I had 3 wires connected to it brown, green(maybe grey), and black. The brown and green wires were connected to the same terminal while the black one was...
How to Wire a Thermostat to blower fan for alternate heat source
[ 5 Answers ]
Hello all I just built a plenum around my coal stove and I need to wire in a stat , limit switch to run a blower fan . Thanks Steve PS I have all the parts off and hot air oil furnace.
Programmable Thermostat, Fan runs, Heat/Air do not run in Auto setting
[ 10 Answers ]
I am installing a Honeywell, RTH230B. My connections are: R to Rh (red jumper to Rc that came with the unit) W to W Y to Y G to G B to nothing The fan comes on (when set to "on").
Thermostat install and wire fell off
[ 1 Answers ]
I attempted to install a programmable thermostat today. I got the old one off and the red wire that was supposed to be RH (mine had a #4) fell off. Before I messed with it it looked like the RC and RH were connected somehow. So I installed the system as if it were a 4 wire system leaving the...
Wire colors for heat pump thermostat
[ 1 Answers ]
While installing a programmable therostat, two of the indentification stickers fell off the wires. The wires colors are blue and brown and I don't want to hook them up wrong. The "ports" are E and C. Any help would greatly be appreciated. Thanks View more questions Search
|