Ask Experts Questions for FREE Help !
Ask
    sterlingpgray@yahoo.com's Avatar
    [email protected] Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2009, 01:44 PM
    Burner are not igniting
    Turn system on, glow stick glows, pilot light lights, but burners not lighting. Help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 2, 2009, 02:32 PM
    Exact brand and model number?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #3

    Dec 2, 2009, 05:18 PM
    Sounds like a Honeywell "Smart Valve" ignition system, if a hot surface ignitor is used to light the pilot. These have a history of failure within the combination ignition module/gas control. Try this: press inward on the square 4-pin connector on the Smart Valve while the pilot is lit. If main burner operation is achieved, the control is bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas Oven Not Igniting [ 1 Answers ]

I have about a 2 year old Frigidaire Gas Oven. The top burners work fine, but when you set the oven to bake, you hear the electric igniter kick in but nothing more. I have made sure as the manual says that the clock is set and the little manual gas switch is set. Any other suggestions out there...

Fan blowing but not igniting [ 1 Answers ]

Have a 6 yr old comfortmaker NDN3/NDF furnace and fan seems to be blowing all the time. Everything seems to be clear and everything but it does not seem to be igniting even if I crank the heat level up on the thermostat. Have a honeywell thermostat and I changed the batteries just in case it was...

Furnace blower going but burner not igniting [ 1 Answers ]

My furnace was going on and off very frequently for the past two days. Now the blower is going but the burner is not going on. Any ideas?

Day & night not igniting [ 1 Answers ]

I have a Day & night furnace and I can't get it to lite. It has a lockout module and the wiring is messed up. I need to know how this system works, how does it lite and what makes the blower go on after the burner lites

View more questions Search