Check out some similar questions!
Trouble shooting furnace blower motor replacement 2FRG1
[ 1 Answers ]
My old motor would make bearing noise after 5 min of operation, bearings went bad. I replaced the motor and capacitor today. Wiring was identical common white Black wire hi speed red wire low speed and white common. The yellow and blue are not used nor there they used on the old motor. Made up...
A.O. Smith fan motor model F48K92A01 trouble shooting
[ 6 Answers ]
Have a.O. Smith mod F48K92A01 fan motor and it runs for a few hours and then shuts down with the compressor still running. I wait an hour or two and turn back on the AC bang the top of the motor and it starts and runs for a few hours. This has been going on for a week and now the motor does not...
Craftsman snow blower trouble shooting
[ 2 Answers ]
I have a Craftsman's 29 inch 9.0 horsepower snow blower. A neighbor's newspaper got caught in the augur. After removing the newspaper, the augur doesn't work. The power drive works OK and the sheer pins are OK. I thought it might be the drive belt but wouldn't the drive belt control both the...
Trouble shooting GMP Furnace draft blower motor slow starting
[ 2 Answers ]
My exhaust draft fan has started giving me problems. The fan doesn't always come on and the furnace won't run. Sometimes the fan tries to turn but just barely and is real warm to the touch. When I can get it to spin it seems to be OK. I'm wondering if it is the capacitor or the motor? Any help...
What is the process of trouble shooting any electric motor
[ 2 Answers ]
What is the process of trouble shooting any electric motor View more questions Search
Add your answer here.
|