 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant Model tstatbbpb501 Thermostat Wiring
I moved into a rental home and the thermostat is operating erratically. When the system is set to Off, the fan runs. When the system is set to heat, it works fine until it's up to temp then cold air continues to blow through the house. I looked at the thermostat wiring and Red is to R. Green is to G. Brown is to W2. White to W1 and Blue is to C. Anyone know if this is correct? I'm thinking perhaps Brown should be connected to Y1 instead of W2. Any help would be appreciated. Thanks
|
||||
Check out some similar questions!
I just bought a Hunter Thermostat and have gotten lost on the wiring issue. My current system uses 5 wires, R, B, Y, W, and G, but it is not clear where these go on the new Hunter system, especially the R and B. Any help? Thanks. Dan
Have a heating & cooling system with 4 Wires, yellow, white,red & green. Please help with wiring diagram
We've been in this house for 25 years now and have had the same heater/ac/thermostat. Lately, I've been looking for ways to cut energy costs and so I bought a programmable thermostat (hunter #44550) based on good reviews. After I read the manual, I attempted to remove the cover plates to our...
My old unit has the W1, W2, and the Y wires. It states to call a contractor. I have, and they do not know the answer. Do I use the W1 or W2 wire for the AUX, and what do I use for the B wire. My old unit does not have one. Thanks, Chris
I replaced a Honeywell T874R1475 Thermostat with a Hunter 44660 Thermostat. I have the labels from the Honeywell and need to know how it traslates to the Hunter thermostat. Honeywell o c/o valve heat x common g fan r power e them heat w2 aux y compressor
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
