Ask Experts Questions for FREE Help !
Ask
    drfinkstinger's Avatar
    drfinkstinger Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 7, 2008, 11:44 AM
    Bryant gas furnace blower won't stop
    Hi,
    I have a bryant gas furnace model 340mav036080, the led stays lit and the blower takes forever to stop. Any help?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Sep 7, 2008, 02:57 PM
    The led should stay lit,, as for the blower taking forever to stop,, just how long is forever? Time it. What kind of tstat do you have in operation, is it new or has it been there forever?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #3

    Sep 7, 2008, 06:26 PM
    If you have no blinking lights on the control board, I would say you have a control board bad. I hate to say it but no parts to buy for the blower control but the control board.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to stop water leakage from a Bryant Gas Furnace [ 2 Answers ]

My Bryant Plus 90 gas furnace has water leaking from one of the pipes that is clamped tight . It is connected to the exterior. Is there any reason why would there be water in the pipe? If so, how do we stop the water from flowing into the furnace? Thank you for reading and would appreciate...

Bryant 90 Plus gas furnace blower motor [ 5 Answers ]

I have a Bryant 90 Plus (350MAV) and have a problem. I noticed that the heater was not turning on. I opened the furnace door and found the diagnostic led flashing 1-3. Upon checking the meaning of the code, I found it referenced a dirty filter of defective blower. I shut the furnace off at the...

Blower Wheel rotation for Bryant 373LAV060-115 gas furnace [ 3 Answers ]

Is the rotation clockwise shaft end or lead end?

Bryant furnace blower restarts momentarily [ 2 Answers ]

Hello I own a vintage Bryant #394GAD036100 furnace that is working just fine accept for one little problem. The unit cycles and maintains the desired temp setpoint (heating mode) but after the main recirc blower shuts off it restarts momentarily one time approx 2 sec later, And again approx...

Bryant Furnace fan won't stop [ 4 Answers ]

I have a Bryant furnace, don't know the model number, but frequently the fan will continue to blow after the heat stops producing. I hear it trying to shut off, (it will sputter off and on) but the majority of the time the fan continues to run, blowing cold air. Any help would be appreciated.


View more questions Search