 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant A/C Unit turns on then off immediately
Hello,
I have an old Bryant AC unit Model 30-563s series B. It just started pooping out on us. Specifically, when it hits the temp that it needs to turn on, it will turn on and within 10 seconds it will turn off. I went out and nudged some of the wiring and it turned on so I ran inside, turned the temp way down so it would stay on. After a week of that, I started to fear the electric bill, so I moved the temp back to 70. When it hit 70 it shut off and when the temp hit 71, it again, turned on for 10 seconds and shut off. Any suggestions for trouble shooting? |
||||
Check out some similar questions!
My 80% goodman furnace is 2 years old. I bought one for myself and my tenant. They do the same thing. They will kick on, but before the blower starts or the igniter lights, it kicks right back off. Once again, it will turn on and almost within 2 seconds, it turns off and will continually...
My trane heat pump will turn on (the outside part ) then turn off after 5 seconds. It never cools the house. I had an hvac guy come out and he said the freon is full and that he could see no loose connections on the unit. He recommended I change out the new digital thermostat I had installed in the...
My Coleman Evcon gas furnce turns on then shuts off immediately. The igniter (electronic) has been replaced and also the circuit board has been replaced (both earlier this year). When it switches on the fan comes on, and the circuit board light is blinking bright/dim (normal operation) but after a...
I installed a new jet pump with a pressure switch which I do not know its ratings. I hooked it all up. It has a brand new flotec pressure tank. When you turn on the water inside the pump kicks on. THere appears to not be any water in the tank. It is a high pitch sound. At the beginning the...
Ok, we had a storm today, and I got home from work to find the house at a hot 75 degrees... the outside unit wouldn't turn on or work or anything... So, I went out and turned off ALL of the breakers, and then turned ALL of them back on... OK, the outside unit spins now... Then I went into...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
