My dad had a Bryant Plus 80t gas furnace installed a couple of years ago. He's having some home improvement work done in the basement where the furnace is. The walls were bleached while the furnace was running. The fumes went throughout the house, so I turned the thermostat off and aired out the...

Hi, I was out all day and when I came home my house was freezing and the furnace wasn't on. It's a Bryant Plus 80t according to the front panel, but the online manual shows different pictures and descriptions when I look that up. The LED status is flashing 4 short, 3 long, which doesn't match to...

Ok, the furnace stopped working this morning. Need some help. The flame goes on, but turns off after a minute. The LED flashing code on the motherboard says 3-1 (31 - which is the high heat pressure switch -- also says to refer to error code 32 which is the low heat pressure switch). I turned the...

I have a 2 year old Bryant Plus 80 t unit the blower will not kick in after the burner lights up, I've checked the fuse on control panel , not blown, a small led light on control panel blinks on and off. Stat is digital and working, burners have bright blue flame and shut down after a minute or...

Hi - I have a Bryant 373LAV/376CAV (not sure exactly which one) mounted horizontally in the attic that is <5 years old and has been functioning perfectly since installed, including for the first few months of this winter. This morning when I woke up, I realized that the fan was in a constant ~1...