Ask Experts Questions for FREE Help !
Ask
    luvtheracquet's Avatar
    luvtheracquet Posts: 5, Reputation: 1
    New Member
     
    #1

    Jul 25, 2012, 07:03 AM
    Bryant 395C A/C Problem
    Hi, I've been having a problem with my A/C coming on in an upstairs unit. It is in the attic.

    I've changed the batteries in the thermostat, changed the filter, changed the capacitor, checked to see that the blower motor is working. (I removed blower motor and jumped it with an old electrical cord and it came on)

    My problem is; the outside unit comes on, the upstairs unit has a low "squeaking noise" the A/C going into the upper part of the furnace, but the blower does not come on. When I put the blower motor back in and hooked up everything back up, it actually started and air was blowing out the vents! But, it was short lived. :( The air coming out was not very cool. I don't understand why the A/C keeps going out? Any help would be GREATLY appreciated.

    Thanks so much!
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jul 25, 2012, 08:22 AM
    Sounds like the bearing in the fan or the motor are worn or frozen. Is the fan belt driven of direct drive. If belt driven, the frozen bearing is probably in the fan itself. Try lubricating. If lubricating doesn't work you will probably have to replace fan. If belt driven the belt could be to loose or worn. Remove belt and see if you have the squeeking noise. If fan and motor manually turn freely the problem is probably a loose or worn belt.

    If the outside unit has been running without the air handler in the attic operating properly, the coil in the attic is probably iced up. Leave everything off for a while to let icing melt.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace problem [ 20 Answers ]

Hi All, I have a 5 y/o 80% eff bryant furnace. The problem I have is that my furnace Doesn't always kick on even when thew thermostat shows the temp under the Temp set. I will sometimes have to go down and turn of the blower switch on the furnace wait a couple seconds and then turn it on again....

Bryant 395C gas furnace won't ignite [ 4 Answers ]

Went through the shut down, start up process in the manual, still won't ignite. Any suggestions?

Bryant furnace problem [ 1 Answers ]

The Bryant furnace I have is model number 376cav036075 and the blower come on but the inducer and the ignition switch don't seem to come on so the furnace in sending out cold air.. What could be the p roblem

Bryant 395C furnace does not kick on [ 2 Answers ]

Everything is on, thermostat is set, furnace had been working but now it randomly decides not to turn. Now here is the kicker. If I turn off the power at the breaker and then turn it back on, or release the blower panel safety switch and then push it back in, or turn off the switch right at the...


View more questions Search