Ask Experts Questions for FREE Help !
Ask
    jlhiggins's Avatar
    jlhiggins Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2010, 06:33 AM
    Bryant 310aav/jav code 34
    We have a Bryant 310AAV/JAV furnace will start up, but will not heat. There is no flame, but you can smell gas. The codes are first 14 then 34. We are without heat and have no clue what to do. Please help
    vaporsdomaine's Avatar
    vaporsdomaine Posts: 1, Reputation: 2
    New Member
    		  
    #2

    Dec 28, 2010, 03:27 PM
    I have a Bryant furnace that is 7 years old. My heat went out on Dec.25,2010, I had a friend from the gas company come out and was told that I needed a thermostat and furnace ignition. I put the thermostat in myself which took 10 minutes, my wires on the thermostat was a 4 wire with red,green,white and blue which hooks up to Y for cold. Before you pay someone to check out your furnace look around first, I was told that to get my heat back on by a contractor that it would be $350.00. I had my friend come out and had to pay $50.00 for the ignition switch and $59.00 for a Honeywell thermostat.It only took 10 minutes to put the furnace ignition on.My furnace was blinking 3 blinks and then 1 blink.As soon as I turned the thermostat on to heat my flame then came on.Good luck.

    Hot Surface Furnace Ignition part 41-409 replaces Tranes Ign26
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 310aav error code 31 [ 1 Answers ]

Bryant 310 aav error code 31. My furnace is 3 yr old and gives error code: 31. The blower fan working fine, but the inducer motor does not start. Also the error code tells the pressure switch open not closed. Will this be a problem with Inducer motor? What are the various things I need to check...

Bryant furnace model 310 AAV/JAV [ 3 Answers ]

Thought the thermostat was bad so replaced the thermostat, sounds like it clicks on but not blowing of the air, and the red light still blinks 2 shorts 4 longs, pilot light also won't come on now. Have done the swith where you turn it off for 5 minutes, still trying to troubleshoot, could use...

Bryant 310AAV code 23 [ 8 Answers ]

I found your forum after having some issues with my furnace. Age is unknown because I rent and my landlords are out of town. When I went to turn the furnace on tonight, nothing happened. House temp registering 68-69 at thermostat, furnace doesn't kick on when adjusted to 72. Fan will turn...

Starting a Bryant 310aav [ 1 Answers ]

I am attempting to start my furnace for the first time since last winter. My furnace is a year old Bryant 310aav which I understand doesn't have a pilot light. I have "reset" the furnace as suggested by an online trouble shooting method by turning off the unit on the side but I have had no luck...

Bryant gas heater model beginning 310aav [ 3 Answers ]

I had not used my furnace over the summer. Before turning on the thermostat, I replaced the filter and checked to make sure red light was on solid. Turned on thermostat and furnace light started blinking error code 23, which according to list on furnace means pressure switch obstructed or off. I...

View more questions Search