Ask Experts Questions for FREE Help !
    jmulske's Avatar
    jmulske Posts: 1, Reputation: 1
    New Member

    Nov 27, 2018, 10:08 AM
    Bryant 100-341
    What is the part # for a limit swtch
    jlisenbe's Avatar
    jlisenbe Posts: 3,323, Reputation: 154
    Well & Pump Expert

    Nov 27, 2018, 06:30 PM
    Start here. Worth a phone call to check it out.

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Bryant plus 90 [ 0 Answers ]

Fan blower works but no heat. Is it the ignitor or flame sensor?

Plus 90 bryant [ 2 Answers ]

I think my blower motor is going and I can't find any numbers or info on it to get another. Anyone have any ideas?

Bryant plus 90 [ 0 Answers ]

Code 31 . The ignitor is taken out for replacement. The inducer moder does not start in the beginning. It starts after the 90 second blower motor runtime. What might have gone bad?

Bryant [ 1 Answers ]

I have a bryant plus 80 series g furnace. Model 395CAV048111. My furnace will start a cycle but goes off. Then the led will flash 5 times, pause and then repeat the 5 flashes. Also, if I unplug the furnace it will reset and complete a cycyle, then it will start going off again. Any help would...

Bryant code 42 [ 1 Answers ]

When the furnace is given the self test all appear to run fine the inducer hi and low, blower high and low and igniter glows. Furnace shuts down after about 2 min on high output. Could it be the control board?

View more questions Search