Check out some similar questions!
How to replace honeywell T8401C and to the honeywell RTH2300 model.
[ 0 Answers ]
In the old setting, red wire -R, white wire -W, green wire-G, yellow wire -Y, and blue wire -C. In the RTH2300 model, I have the R,RC,W,G,Y,O/B options. I tried connection R,W,G and Y to the corresponding wired colors, and left the blue wire unconnected. Can someone please help. Thank you.
I installed an RTH2300 this winter to replace an old mercury thermostat.
[ 2 Answers ]
I installed an RTH2300 this winter to replace an old mercury thermostat. It worked fine for the heating season. I turned it to Cool for the first time today and my AC and furnace blower will not turn off. Keeps cooling even though I have it set at 80 degrees and the temperature reads 76.
I need a replace remote because my ceiling fan works but the light is not working.
[ 1 Answers ]
Replacement remote if possible would be nice...
Honeywell RTH2300 - Cool air when heater starts up.
[ 0 Answers ]
I have a Honeywell RTH2300 - when the heater starts up, the fan blows out cool air. After a couple minutes the air is warm. The fan blows cool air for 2-3 minutes after the heater turns off.
Do I replace entire ac/heater unit if only my heater needs replacing?
[ 1 Answers ]
I have a tri-level condo that is now 20 years old. The heater portion of my H&A unit has gone out. My question then is since I've not gone on the roof to actually see my own unit but I'm being told I have to replace the ENTIRE ac/heater unit in order to fix the heater. (Problem on heater is that... View more questions Search
Add your answer here.
|