Ask Experts Questions for FREE Help !
Ask
    analog414's Avatar
    analog414 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2010, 05:34 PM
    Blower on after power up error code 12 Carrier 58RAV
    I have a "blower on after startup (115v or 24v)" error 12 going on. When I shut down the power for 15 minutes and restart. The unit right away starts the blower and thats it! No attempt to ignite at all. The blower just blows colds air and does not stop. Any suggestions on this would be great. I just need a fishing pole. Thanks Rick
    analog414's Avatar
    analog414 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 14, 2010, 07:34 PM

    UPDATE: Interesting. Blower ran 90 seconds. Then code 33 starting blinking. Then the glow stick lit and flames. But that only lasted 3 minutes as the flames went out and it blinked 33 again. But a minute or so later the glow stick started and flames. This went on maybe 5 minutes and then cycled all over again. I did change the filter. It was dirty but it has been worst before. It appears that I have heat. Never looked at the furnace in action before. I assume it never cycled back to heat hence the 58 degrees when i got home. Maybe and hopefully it was just the filter. Thanks so much for the replies.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #3

    Jan 14, 2010, 07:34 PM

    Turn the thermostat to off. Try a restart again. The blower will run for 90 sec if the thermostat is calling for heat or cooling after loss of power is restored.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier furnace error code 33 [ 3 Answers ]

I have a Carrier furnace that displays error code '33'. Carrier only provides the answer to service personnel. What does this code mean as my furnace keeps going out? -sincerely, getting cold.

Carrier Furnace error code #42 [ 3 Answers ]

Hi, I have a Carrier Furnace model #58SXB080G6 Which is flashing the error code #42. Can anyone tell me what that is and how to fix it?

Carrier Weather Maker - error code 31 [ 3 Answers ]

Hi: I have a Carrier Weather Maker Infinity gas furnace model # 58MVP120. The problem is on some occasions the furnace will not switch into full heat mode. The blower seems to gain speed as it it is going to change into high speed but it shuts down before it gets there. Turning off the power...

Carrier 8000 Error Code 21 [ 9 Answers ]

Hello all, I have read through many post but can not find info on an error code 21. Any idea which direction I need to go with fixing this unit? Unit says 21 is a Gas Heating Lockout or Stuck gas valve relay. Does this mean I need to get a hammer and tap on that thing to unstick it? :D Any Help...

View more questions Search