Ask Experts Questions for FREE Help !
Ask
    Dave11249's Avatar
    Dave11249 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2012, 09:07 AM
    Beacon morris garage heater?
    I hooked up a 75,000 BTU heater in my garage last weekend and at first everything worked fine. Later, I heard the heater running, even though the thermostat was in the off position. I called Honeywell and we concluded the thermostat was bad. Got a new one, installed it, and everything was fine for two days... the heater was off when the thermostat indicated it should be. This morning, the heater was running again, even though the thermostat was in the off position. Any ideas?
    tooldad 21's Avatar
    tooldad 21 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Dec 9, 2013, 08:47 PM
    Your thermostat wires are probably touching somewhere. Shut it all down and check for continuity with a meter, if so replace t-stat wire.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Beacon morris garage heater? [ 5 Answers ]

After just one winter of use my heater quit working when it calls for gas, gas came on but it would not ignite so I replaced the igniter, still did not work so I called a repair man he told me that the control board was bad so now I have a heater that is two years old that I paid approx 650 dollars...

Beacon Morris Tubular Heater [ 2 Answers ]

45K BTU garage/shop heater. POS from day 1. I have replaced the ignitor, now after reading the book(AGAIN) the 4 flashes indicates that either my Roll Out Switch or Hi Limit Switch need to be reset - my question is this. What type/amount of resistance should I measure on these two switches to...

Beacon Morris BTU 45 won't ignite [ 2 Answers ]

I have a Beacon Morris BTU 45 garage furnace. When I turn it on it goes through the process of heating with the exception of no heat.The blower starts up to expel any gas, the ignitor lights up and then the main blower comes on. I put a flame to the burners and nothing happened. It seems like...

Installing beacon morris heater bru45 flue pipe [ 1 Answers ]

I am installing a beacon morris bru 45 heater. Looking for some advise on running the flue. Through the wall or the roof. And how to finish off if I go through the wall. Its vinyl siding

Hooking up a Beacon Morris garage heater [ 16 Answers ]

Hello I just purchased a Beacon Morris garage heater. It is a BRU-75. I was wondering if anyone could tell me where I could purchase a thermostat for this particular model. I want to have a switch on the thermostat that will let me shut off the unit when I don't want it to run. I don't want to...

View more questions Search