Ask Experts Questions for FREE Help !
    kenhock's Avatar
    kenhock Posts: 1, Reputation: 1
    New Member

    Jan 30, 2007, 02:35 PM
    Aux heat vs emergency heat
    I have kenmore furnace/heatpump/air units. The thermostat has a switch for heat and one for emergency heat and both have light indicators. The aux heat indicator is lit when heating the house on "heat". When should the emergency heat setting be selected?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member

    Jan 30, 2007, 04:39 PM
    If it is running on aux heat allot just change it over to emergancy the heat pump is no longer keeping up anyway.

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Changing from gas heat to electric heat [ 3 Answers ]

How do you change from Apollo gas heating system to electric heating system?

Electric heat pump auxilery heat problem [ 4 Answers ]

Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not....

Emergency Heat vs Auxiliary Heat [ 1 Answers ]

Why is my thermostat saying the Emergency Heat is on rather than the auxiliary heat and what do I do to correct the problem?:confused:

Emergency Heat Light [ 1 Answers ]

My emergency heat light comes on much too often if its 40 outside the heat strips take over can you tell me why?

View more questions Search