Ask Experts Questions for FREE Help !
Ask
    toddthall's Avatar
    toddthall Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 25, 2010, 08:57 AM
    Armstrong Ultra V Tech 80 - Can I use any type of filter in this unit?
    I used a thicker filter one time and the person I got it from said it burned something out. Now I have been using the cheap filters. Question is, can I use the thicker filters on this unit?
    Thanks
    Todd
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 25, 2010, 10:21 AM
    You are asking a good question but sorry to say I do not have a good answer. Thicker filters can cut down the air movement going past the heat exchanger of the furnace especially when they get a bit dirty. The only true way to find out if thicker filters could cause a problem is to use a special tool to measure the air flow then compare that figure against the factory designed minimum air flow for the exact model of furnace you have. Sorry but I do not have a yes or no answer except to say that unless the test that I mentioned is performed it would be wise not to take any chances and just continue to use the cheaper filters you have been using.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Armstrong ultra V tech 80 [ 0 Answers ]

When furnace comes on it does not reach desired temp.then cuts off a couple of minutes then reignites it repeats this cycle multiple times then finally cuts off,replaced control limit switch ran fine for about 1 1/2 weeks now its doing it again.any help would be appreciated

My armstrong ultra sx 80 furnace will not ignite. I have replaced the dirty filter, [ 2 Answers ]

My armstrong ultra sx 80 furnace will not ignite. I have replaced the dirty filter, but the fan stay on all the time, without igniting the pilot. I have already checked out the rubber tube connected to the pressure switch/ combustion area. There is no rust or clog, and when I blow in the tube I...

Armstrong Ultra V Tech 80 furnace troubleshooting [ 0 Answers ]

My armstrong Ultra V Tech 80 furnace suddenly doesn't want to ignite. Please bear with me as I don't know a whole lot about furnaces. I can hear and see the gas come on, but it does not ignite. I can hear a clicking noise I assume is the ignitor trying to engage, but the furnace doesn't start. It...

Armstrong Ultra V Tech 80 Filter change [ 3 Answers ]

Where is the filter located for an Armstrong Ultra V Tech 80 furnace? How often should it be changed? This is a forced hot air system. Also has central air. Can they be purchased locally ie: Home Depot or Lowe's? Tha nk you.

Adding a Humidifier to a Armstrong Air Ultra V Tech 80 [ 1 Answers ]

I am installing an Aprilaire Humidifier 500a on an Armstrong Air Ultra V Tech 80 furnace. Where do I get the 24 VAC from the heating side of the furnace to feed the humidifier control?

View more questions Search