Ask Experts Questions for FREE Help !
Ask
    tmeomaha's Avatar
    tmeomaha Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2008, 07:18 PM
    Armstrong Ultra SX 80 Replacement Pressure Switch
    I need to replace my pressure switch made by TRIDELTA.
    I believe it is part number PPS10090-2615.
    It also has the following numbers: 046317/0014/B and 44819-002.

    Does anyone know what the specs are for this pressure swtich? Is there a less expensive option for replacement? Any feedback would be appreciated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 20, 2008, 07:35 PM
    Get one here since you cannot tell by the numbers what pressures it is set up to work under.


    Armstrong Replacement Furnace Pressure Switch (2-Wires & 1-Hose): Best Buy Heating and Air Conditioning
    tmeomaha's Avatar
    tmeomaha Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 20, 2008, 07:39 PM

    Thanks for your response. After searching the web, I have found many 2wire/1 hose pressure switches for much less than the Armstrong replacement from Best Buy Heating and Air Conditioning. I was hoping to find another option.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Armstrong Ultra V [ 1 Answers ]

Armstrong Air Ultra V, 4 yrs old: Problem: *Igniter comes on with bright red/blue flame *Burners then come on *Fan blower comes on *Shortly after blower comes on, burners go out, and blower continues to run *Igniter comes back on *Burners then come back on *Then Burners go out again...

Deep well, pressure tank/switch not building pressure [ 13 Answers ]

The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

Armstrong Ultra sx 80, pilot light lit, but heater doesn't turn on [ 4 Answers ]

We have a propane heater. We have propane in the tank. There is air blowing through the vents, but there is no heat. Usually, there is a clicking sound in the thermostat, a whumph sound in the heater and the heat comes on. Now there is no clicking sound and no whumph. Consequently, no heat. ...

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search