 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
After installing thermostat, heat/ac will not turn off
I just installed a Honeywell RTH2300 in my home to replace an old mercury unit. It appears to be somewhat working, but the AC/Heat will not shut off. For example, it is set at 75 and the ac keeps running down indefinitely. Also, when the thermostat is switched to the 'off' position, the heating/ac unit keeps running and stays on.
I have read the owners manual and installation guide cover to cover and nothing seems to jump out as something I did wrong. Any help would be appreciated! |
||||
Check out some similar questions!
I have an Amana Heat Pump RHA36B2A and am replacing the thermostat with a pro 1 IAQ T 905 thermostat. I have hooked up all the normal wires (Red to RH and jumper to RC, White to W and jumpered to Y, Yellow to Y, Green to G and brown to C). Then turned on the heat and it works fine. However, when...
I have a summer home in NJ. My wife and I had not been to the home for one month. The heating themostat was set at 60 degrees. When we arrived this weekend, the temperature in the home was over 100 degrees. The thermostat was absolutley blank and the heat was running. I changed the batteries...
I am trying to install a Honeywell TH4210D thermostat to a Goodman PHKJ030-1 heat pump. Most wire colors match up but the Blue wire seems to be confusing. I'm not sure if it is a common wire on a Goodman. Also are there any jumper wires I need to install or remove?
Dear Sirs: I am replacing an old Bryant heat pump thermostat with a Honeywell RTH7600. I stopped the installation when the manual said, "Contact a professional" if You have a "W1" wire. Will you please help me? The wires that I have are: r, o, e, y, g, c, and W1.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
