Ask Experts Questions for FREE Help !
Ask
    2kerwins's Avatar
    2kerwins Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2009, 07:49 PM
    AC not running after furnace issue
    This winter our furnace started to have flame roll over, so we had the gas shut off to the unit. Now that it is getting warmer we need to run the AC, but nothing is working. Please help!
    :p
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Apr 24, 2009, 08:53 PM
    1st,is there power at the a/c?
    2nd,is there power to the furnace?
    3rd,s the door/cover closed to the gas furnace?
    4th,have you checked and double checked the breakers to the a/c and to the furnace?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Apr 25, 2009, 06:46 AM

    If nothing runs sounds like there is no power at the furnace
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace won't keep running [ 9 Answers ]

I have a programmable thermostat. In the morning when the furnace comes on it will run for one cycle and then stop. In order to get it to start again, I have to turn off the heat and then turn it back on again. I have had technicians out several times. They have replaced various parts and...

Furnace Not running [ 7 Answers ]

Hello: I have a Armstrong Air Ultra 5 Tex80 Furnace HoneyWell Gas Valve SV9520H8034 Ultra V Tech 80 Armstrong Air Mack GIN80AT075D12A-1 Serial #1602L21430 It has a smartVlave on it as well. I can't get it to start. The thermostats has been changed on it and I have jumped out R and W...

Is there any issue running a 3/4 hp Gould well pump over 60 psi? [ 1 Answers ]

I have a Gould 3/4 hp submersible well pump and I've been making adjustments to the Square D Pumptrol switch so that it works efficiently with an irrigation system. I have to keep the low end pressure set to 40 psi so that the irrigation "bell" doesn't release and drain the well at about 30 psi. ...

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

View more questions Search