Ask Experts Questions for FREE Help !
Ask
    josephFL's Avatar
    josephFL Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 24, 2006, 11:59 AM
    AC/Heating unit stopped running - No power
    My Janitrol AC Heating unit stopped running suddenly. I can neither use the Cool nor Heat (if I switch to either on the thurmostat I hear nothing). The fan doesn't run either when switched to ON.

    I checked the cirtcuit braker for the AC/Heating using and it was in the ON position, but when I try to reset it it doesn't click into position back and forth.. it seems like it is broken..

    Any suggestions? Does anyone have an idea if I should call an electrician or a AC repair man?

    Thanks,
    JH
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #2

    Nov 24, 2006, 12:07 PM
    Bad fuse on the PC board, safety door switch bad or not engaged. Bad transformer. You need to find out if you have 120 V into the transformer and 24 V out of it.
    josephFL's Avatar
    josephFL Posts: 3, Reputation: 1
    New Member
     
    #3

    Nov 24, 2006, 12:20 PM
    Thanks for the response, Northern. Any suggestions on who I should call first? This is my first time owning, so I am complete rookie at these types of things.

    Thanks!
    JH
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #4

    Nov 24, 2006, 12:22 PM
    Call your parents or trusted friend in the area for a referral to a good Heating and Air Co.
    josephFL's Avatar
    josephFL Posts: 3, Reputation: 1
    New Member
     
    #5

    Nov 24, 2006, 12:23 PM
    Thanks! Much appreciated!

    JH

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Neptune Dryer Stopped Heating M/N MDG4000BWW [ 4 Answers ]

Hi, Please Help! My girlfriends dryer stopped heating suddenly. It's a Maytag Neptune Model MDG4000BWW. There is no heat whatsoever. I am hoping there is something inherent with this model that I can start with. Any suggestions will be greatly appreciated. Thanks.

Ac/heating unit [ 3 Answers ]

Dear Sir, I have a heating unit it will work sometime but it will not turn on sometime like the other night when it got below in the low 50 it came on for two day's mow it will not come on for a few more day's when it drop's below in the low 50 it work's sometime then not off and on can you help me...

GE Dryer Stopped Running [ 1 Answers ]

I have 3 year old GE Dryer that stopped running yesterday. I started a load of clothes with no problems, and went out to get them about 4 hours later. Well, a cord had been laying over the timer switch and it would not let it turn, so the dryer ran the entire time. The dryer was not hot at all,...

Air/Heating Unit (Electric) Suddenly stopped working [ 5 Answers ]

Hello In July we replaced the motor and the relay switch on the unit outside the house. The unit had been running fine. Sept. 14 it was a little muggy in the house so I turned the thermostat down to 72 to kick the air on. Nothing happened all I heard was a "click" which would normally start the...

Furnace keep running while condenser has stopped [ 3 Answers ]

Hi, When I switch my thermostat to cool, the furnace fan runs as long as I keep setting at cool, but the condenser stop after about 30 minutes. The fan switch on the thermostat set to Auto. As far as I remember, the whole system should run for a period and then stop for a while (like taking...


View more questions Search