Check out some similar questions!
Replace or repair wall mounted toilets-change to floor mounted?
[ 3 Answers ]
I have an older home with wall mounted toilets ‘back to back‘ in adjacent bathrooms. One of the toilets is damaged and needs to be repaired or replaced. Both toilets have deposits built up over the years. Would it be more cost effective to replace one or both of the toilets with new wall mounted...
Trouble shooting 240V wall heater installation
[ 1 Answers ]
I have wired a cadet heater 2000 watts, 240v on its own 20 amp circuit with a new 12/2 wire direct to panel. I have a honeywell thermostat (3500 Watt)for 120/240 baseboard/ wall heaters. I have wired this the same as other cadet heaters in my home but this one does not work. I've interchanged...
Wall mounted bathroom heater
[ 1 Answers ]
I have a 1970's electric wall heater unit that does not work. It is flush with the wall; has a metal grate cover; a single circular ceramic tube center and sits in a metal box. I have searched the internet extensively for a replacement unit... does anyone know where I might find one or if I can...
Installing new 240V circuit for wall heater
[ 1 Answers ]
I had an electrician install all new circuits, outlets and recessed lighting for my basement finishing project. Just as I'm about to put up the drywall I considered that it might be worthwhile to add a wall heater before I close everything up. This morning I purchased a 3,000 watt model at HD. ...
240v wall heater on single pole switch
[ 4 Answers ]
Hello, The wall heater is on a 240v circuit. On the heater itself it has a on/off siwtch. But someone wanted a wall switch in another room to control the switch. Is it okay to use a single pole switch to switch one of the hot legs of the heater? Thanks in advance View more questions Search
Add your answer here.
|