Ask Experts Questions for FREE Help !
Ask
    amelalyousef's Avatar
    amelalyousef Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2008, 12:02 AM
    Hardware Malfunction
    Hello,

    I have a toshiba laptop and I recently developed a problem.

    My computer always gives me an error in installing a hardware and need to reinstall and install again, and when I do that the same messege appears.

    For example: if I plug my web cam, the microphone on the camera works but the camera doesn't! And when I plug in the printer (3 in 1) the printer works and the scanner doesn't, although I reinstalled it and the same error in hardware installation appears.
    And my digital camera is not recognized by my laptop now! And the web cam, printer and digital camera were all working well before.
    When I plug the mouse it works well.

    Could the problem develop when I plugged in the webcam and digital cam at the same time?

    (FYI: the plug is a USB port)

    What could the problem be?
    I need help please.

Check out some similar questions!

Ceiling fan malfunction [ 9 Answers ]

I had a Casa Vieja Probe II ceiling fan (w/light; no pullchain) installed about two years ago. It has a wireless remote for fan and light operation, and when I had it installed the electrician connected it to a wall switch so I could also turn it on/off at that location without using the remote....

New toilet malfunction [ 4 Answers ]

New toilet... The water does not go completely out of the bowl when flushed. It swirls around and the solid waste stays in the toilet. It has to be plunged and plunged. We had the septic tank cleaned - no problem there. How do I change the water level? IS that a place to start? Thanks.

Fan Malfunction [ 3 Answers ]

Recently installed 3 speed, ceiling fan with light worked properly for about 6 weeks. Now fan only works on one speed and slows when light is turned on. What might be causing the malfunctioning?

My PC malfunction [ 2 Answers ]

Why is it that when I use my PC my computer says vga no signal?? Wats does vga mean?? :confused:

Furnace malfunction [ 8 Answers ]

I have an old (14 years ?) York Stellar furnace that used to have this problem sometimes. When the gas was released over the red glowing electric igniter, it would ignite with a more or less loud pop that would also kill the flames. Then it would go again through the whole sequence and everything...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.