Ask Experts Questions for FREE Help !
Ask
    milky's Avatar
    milky Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2007, 05:48 PM
    Snow blower won't start
    I have 9 hp craftman snowblower that doesn't start. Ihave replaced spark plug,cleaned filter.any sugestion?
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    Feb 15, 2007, 08:03 AM
    Try priming it with a little fuel, this consists of taking the air cleaner off and putting a small amount of fuel directly in the throat of the carb. Safety switches are a common no start problem on sno blowers, check them all.
    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ultra by murray snow blower [ 1 Answers ]

Hello, Looking for impeller for ultra murray model f2484020,code5212,ser002313337309 8hp,hmsk80, any help thank you greg

Snow blower not picking up snow [ 2 Answers ]

I have a Noma 5.0 HP snow blower that is not working correctly. The shears are not turning and picking up the snow. I've checked the shear pins, but they seem to be in good condition. What else should I check? Thanks

Snow Blower [ 2 Answers ]

Show me the snow blowers you sell

Snow blower [ 1 Answers ]

I got a new snow blower last year and used it once, worked great, this year it won't start. Primer is just pushing air, gas line is not bloked. I put I little gas in the spark plug cylinder and it fired up for a second. Gas is not going through the carb, is something stuck, what should I do. I did...

Snow blower shear pin [ 1 Answers ]

I broke a shear pin on my craftsman snow thrower. The head and retainer nut are sheared off properly but I don't know how to get the actual pin out of the shaft. Should I just use a small screwdriver and hammer and just knock it out? I have replacement pins.

View more questions Search