Hello everyone, I'm obviously new here and hope to find help. I have a client who wants me to run a dryer vent through a glass block window. Can I cut a 4-1/16" hole in it without shattering or cracking? Or how can I remove 1 block of glass? Thanks

I have just about finished my Basement and I would like to make my bar out of glass block? How would I ancher the blocks to the concreat floor? Should this be done before or after the laminute wood floor is put down? The blocks that I would use are 12X12. Thanks:confused:

Power washing my block foundation to remove old peeling, flaking paint has left pock marks and some loss of mortar in joints. How do I repair and then what type of primer paint should I use? (Don't know what the original paint was-oil based or latex). I'd appreciate your help. Thanks.

Hi All, My house is on a hill so the front is at level with the street and the back foundation is partly exposed. The garge is part of the basement and level with the driveway. Over the years water coming down from the roof and building up behind a 2 1/2' retaining wall next to the garage has...