I want to take down a retaining wall made of railroad ties. There are large spikes holding the ties in place. I need to know how to remove these spikes.
Add your answer here.
Check out some similar questions!
Railroad tie retaining wall [ 5 Answers ]
I am in the process of building a retaining wall using railroad ties and rebar. I am having difficulty with the creosote in the ties gumming up, smoking, and getting hot using an 3/4" auger bit. Is this the correct type of bit to use or should I be looking at using another type of bit?
How do you remove the bow tie from a kenmore 90 washing machine? 110.26902692 [ 0 Answers ]
How do you remove the bow tie from a kenmore 90 washing machine? 110.26902692
Railroad tie wall [ 6 Answers ]
Am thinking of building railroad tie wall using 6x8 ties with 6''side for the height. It will be 30'' high and 25' long. How would it look if I stepped ties back 2'' and ending top tie with 6x6 instead of 6x8. Have seen walls built straight , never with a step back. Chuck
Old railroad tie retaining wall [ 4 Answers ]
There is a 15 foot railroad tie wall holding up my raspberry bed. The problem is it is starting to lean and the dirt is sinking on one side. Is there anything I can do to repair the wall without re-doing the whole thing? It is an old wall. Maybe 30 years or so.
Question(s) about replacing a Railroad Tie Retaining Wall [ 2 Answers ]
Hi, I have some time off this summer and I was thinking of replacing a rotted-out, railroad tie retaining wall we have in the front yard. I'd like to replace it with block. Here is the setup. From our driveway, there is a concrete path that curves to the front of our house (the driveway / garage...
View more questions Search