Ask Experts Questions for FREE Help !
Ask
    laurenmcc1's Avatar
    laurenmcc1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 9, 2007, 08:01 AM
    Garage Door Scraping
    I recently purchased my home and have been using my garage daily. I noticed a few weeks ago that paint and a little bit of wood is chipping off the door every time it opens.. is there an easy solution to fix this?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Oct 9, 2007, 08:05 AM
    Take a close look at the track the door travels in on each side of the garage. There is an axle and roller attached to the door that rolls in this track. The rollers aren't adjustible but the track can be adjusted. Loosen the bolts that hold the track at the floor, middle of the door and at the top. You can move or pry the track away from the door frame just a few MM and then tighten the bolts. Try the door and adjust further if desired.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Overhead Door garage door opener light just blinks? [ 5 Answers ]

:confused: My 15 y/o Overhead Door (brand) garage door opener was working fine opening & closing until a few days ago. It has very low usage because I mostly park my car outside the garage door. Now when I press the remote control w/ new battery OR the hard wired wall switch, the light on the...

Door scraping floor - needs rehanging or tightening [ 3 Answers ]

I have a wooden door for the downstairs bathroom and it is scraping the tile floor. Since the floor is tile and the door has not been wet (ie: not swollen), I can only surmise that I have to tighten the door hinges or something. It doesn't appear to be mis-aligned with the door frame - However, I...

Garage door opener prevents door from opening all the way -- how to fix? [ 1 Answers ]

My wife and I moved into a house three months ago and we didn't realize this problem before we bought it. I'm trying to solve a problem with an existing garage door and Genie opener which due to the amount of backroom along the tracks, doesn't allow me to open the garage door the full length...

Garage door [ 2 Answers ]

When I close my automatic garage door it closes then a couple seconds later opens on its own

Garage Door [ 3 Answers ]

I am in NYS and want to insulate my garage door with 1.5" rigid insulation board. This is a signal door for a double garage. Will the added weight of the board require a change in the torsion spring (this door has one above not 1 on each rail. I am getting conflicted advice from people so I am...


View more questions Search