Ask Experts Questions for FREE Help !
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member

    Oct 10, 2017, 02:39 PM
    Double Hung Window
    The old window itself is 36 x 36 inches. The new window states rough opening
    36 in x 36 in. Actual 35.5 in x 35.5 in
    Will this new window fit in the existing space?
    jrmorton's Avatar
    jrmorton Posts: 2, Reputation: 1
    New Member

    Oct 10, 2017, 04:26 PM
    Definitely should go right in with room for shims
    ma0641's Avatar
    ma0641 Posts: 15,681, Reputation: 1012
    Uber Member

    Oct 10, 2017, 05:53 PM
    If you measured 36" at the outside of the casing, it will fit.

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Double Hung Window [ 3 Answers ]

Sash perhaps came loose. Double hung window does not tilt. Top pane is stationary. Hard to open. How to remove sash window? See pictures

I have new vylon double hung window and have frost on inside middle [ 1 Answers ]

I have new vylon double hung windows and I have frost on top shash by hooks

Fixing a double hung window [ 5 Answers ]

I have a small (3 feet wide) double hung window in a bedroom. When I open the bottom, where the screen is, the top falls down a little bit and there is no screen there! How do I prevent the top from falling open? Thanks for the help!

New Windows (Alliance? Double Hung) [ 5 Answers ]

I recently had my home built in a rural area (very open to the wind). During winter months (this is the 2nd winter in the home) most of my windows will get a little moisture on the glass, just above where I lock/unlock the windows to open. My problem is the 3 windows on the Northwest side of my...

Vinyl Double Hung Windows don't LOCK [ 1 Answers ]

All, So I just bought a condo, it has vinyl double hung windows. Bad part is that they don't lock. I push the top window as far as possible, and the lower one down as much as it can go, but I am still 1/2 inch off from the latch being able to lock. How can I correct this ? Is it expensive...

View more questions Search