Ask Experts Questions for FREE Help !
    akabuldinov's Avatar
    akabuldinov Posts: 3, Reputation: 1
    New Member

    Jul 10, 2015, 03:45 AM
    Heat energy into electrical energy
    Working concept of condenser in a power plant

    The company uses power plant with condenser (direct translation from my language). So, to decrease the temperature of a steam condenser is used. Water comes from a river into the condenser, gets heat from a steam and goes out to the river again. So the difference between temperature coming from river and going out of condenser to the river is approximately 5-6 С. If considering that the volume per hour of outcoming water is 20 000 m3/hour it is a huge amount of heat loss that could have been converted to electrical energy.

    This is the problem of a company. Some of the possible solutions to this problem are:

    1) To use heat pump

    2) To use thermoelectrical generator

    The question is:

    1) What are the other possible solutions? And what solution might be the best choice for it? Could not you explain the ways of using it?

    2) What do power plants around the world use to convert heat of water in condenser to electrical energy?

    Thank you very much for your attention.
    smoothy's Avatar
    smoothy Posts: 25,494, Reputation: 2853
    Uber Member

    Jul 10, 2015, 04:08 AM
    Homework questions REQUIRE you to provide your work or your answer and why you believe it is the right one.

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Heat energy to electrical energy project [ 1 Answers ]

I am working on a project where I need to store heat from stove and later convert it to electricity. How isthis possible without the use of thermocouples

Can we measure energy of 2 single phases in a 3 phase energy CT meter [ 1 Answers ]

We have two single phase energy sources. We want to measure the energy flown through these two phases in one meter. Can we use a 3 phase CT meter, connect two CTs to the meter and short the CTs link of the 3rd phase in the meter?

Is nuclear energy the highest possible source of direct energy? [ 6 Answers ]

Coming strait form a reactor, do nuclear reactors produce the biggest amount of energy that we can manipulate?

Explain with the revelance, the importance of Kinetic and potential energy in energy [ 1 Answers ]

Explain with the relevance, the importance of kinetic and potential energy in energy reactivation

View more questions Search