 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring to replace Hampton Bay remote on Hunter fan
My old Hampton Bay remote seems to be interfering with the light on the Hunter fan (fan worked, but not the light until I took the remote off then everything works). Two weeks ago everything was fine, so in theory crossing the brands should be okay, right?
Receiver has a black and white to connect to the AC supply and blue, black, and white to connect to the fan. My wiring is: From the ceiling to remote receiver: Black supply to black receiver; white supply to white receiver; and blue to ? (I have tried to black receiver and just capping it off) From the receiver to the fan: Black to black; blue to black w/ white stripe; and white to white And green from ceiling to fan green And my question is: what to do w/ the blue wire from the ceiling? The setup w/o the receiver is obvious: black to black, white to white, blue to blue, and green to green; that works fine. But when I add the remote.. |
||||
|
||||
|
Capping the blue is fine. You have two fans and remotes, or you're using an HB remote with a Hunter fan? If so, why? Ceiling fan remote controls - help and FAQ- Ceiling Fans N More Ceiling Fan Wiring - Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Will a Hampton Bay remote operate a Hunter ceiling fan ? The only difference I can see is that the Blue remote wire would go to the Black/White wire instead of another blue wire. Is this correct and will it work ? Thankful for any input.:confused:
I am attempting to install a Hampton Bay remote unit with my Hunter fan. The remote is suppose to be universal and has three speeds plus the light control. The remote instructions clearly state to to hook the black / white power leads to the ceiling power. This is straight forward and not an...
I have a Hampton Bay, Courtney Model 42-CN ceiling fan with light kit. It works fine. I am adding a remote control kit, Hunter Universal Model 27185. The directions for the remote call for a red wire leading to the light, but the wires from the ceiling are black, blue and white. Assuming blue...
Yesterday I installed a new Hunter ceiling fan. I also purchased a Hampton Bay wireless remote that says works on hunter fans. . Everything went well until I wired up the remote receiver. The receiver has a blue wire for the light that is supposed to connect to the blue wire (light) from the fan....
I installed a Hunter ceiling fan with a Hampton Bay remote about a year ago and it stopped working. I called Hunter and they sent me the whole new lower assembly with capacitors and chain pull. However, that was not the problem. I have power to the fan through the remote transmitter to the...
View more questions Search
|
